OMAX 5555 PRECISION JETMACHINING CENTER
The OMAX 5555 JetMachining Center is a perfect fit for shops needing a machine with a smaller footprint but capable of cutting 4 foot x 4 foot. With a completely sealed and protected ball screw drive system, this robust and reliable workhorse is perfect for shops cutting projects needing high precision.
Technical Specs:
Machine Dimensions
| Footprint * – (L x W) | 10' 11" x 7' 11" |
| Height ** | 9' 10" |
| Weight (tank empty) | 6,291 lb |
Work Envelope
| X-Y Cutting Envelope *** | 4' 7" x 4' 7" |
| Z-Axis Travel *** | 8.00" |
| Table Size – (L x W) | 6' 8" x 5' 5" |
Standard Model Specifications
| Speed | 180 in/min |
| Linear Positional Accuracy | ±0.0010" |
| Repeatability | ±0.0010" |
Benefits & Features:
- Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
- Backed by our exclusive Intelli-MAX Software with real world cutting data
- Robust and accurate design for tight tolerance cutting and reliable operation
- Easy operator access to the work area
- Small, efficient footprint for minimal floor space utilization
- Precision X-Y Axis rigidly mounted to the cutting table
- Pre-loaded linear bearings and precision ball screws
- Drive system sealed against water, dirt, and grit
- No tool changes & minimal fixturing dramatically reduce setup
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- Leaves behind a satin-smooth edge, reducing secondary operations
- Does not create heat-affected zones or mechanical stresses
- Environmentally "green" system uses only natural garnet abrasive and water in the cutting process
- No noxious fumes, liquid or oils used in, or caused by, the machining process
- Shipped as a completely pre-assembled and factory-tested system
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
- Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
- Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Optional Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis
- Optional Tilt-A-Jet taper eliminating abrasivejet cutting head
- Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
- High efficiency EnduroMAX pump system available in 30 hp, 40 hp, 50 hp or 100 hp with operating efficiencies up to 85%
- EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
- Highly robust and reliable pump design capable of over 1,000 hours between maintenance
- Uses substantially less cooling water than inefficient hydraulic intensifier pumps
- Lowest electrical consumption compared to other pump technology
Resources:
Documents
Videos